How to fix peeling walls yourself

The condition of the walls can deteriorate over time, with chipped classics being one of the most common signs. These can appear for multiple reasons such as, for example, natural aging of paint, environmental pollution, solar radiation, lack of ventilation, the incidence of rain and, especially in the case of indoor spaces, the humidities.

As is well known, any water leak or a broken pipe can cause the paint on the wall to completely peel off the wall, creating a very dirty and scruffy effect that breaks with the aesthetics of the place.

Fortunately, it is a problem that can be easily solved and that, in addition, you can fix yourself. You just need to acquire the appropriate materials and follow a series of steps. Take note and become a real handyman!

Fix peeling off the wall

How to fix the peeling of the wall, step by step

Before getting down to work, it is essential differentiate the two types of spalling which you can face, as this will decide the technique and materials that will accompany you in the process.

First of all, if the problem is so deep that you can see the foundation of the wall or, failing that, the bricks of the wall, you must start the arrangement with a mortar base, which is a mixture of various materials such as lime, cement, water, and sand. Afterwards, you would only have to finish it with a layer of plaster.

On the other hand, if the chipping is more superficial, with the classic layer of plaster or plaster it will be more than enough. Under this premise, what steps should you follow to leave your wall in perfect condition?

  1. Prepare and clean the surface with the help of a spatula. It removes dents and chipping from the paint, even the surrounding area that also has imperfections.
  2. Then clean the surface again, this time with a damp cloth to remove dust, paint chips or any trace of mold that may be present.
  3. When the wall is dry, apply the mortar base (the mixture is sold ready-made in specialized stores). If this step is not necessary, directly spreads the plaster layer.
  4. Smooth it out and distribute it over the entire surface affected, always using a trowel or trowel.
  5. When the plaster has set and is completely dry, it will be time to repaint the wall and enjoy your amazing work.

Deja un comentario