How to drill tiles?

For any DIY handyman there are also some tasks that are more challenging than others, such as when we decide drill or drill a tile.

Sometimes, it takes us months to decide the optimal time to put a new towel rail or furniture in the bathroom, however, it is not due to lack of time, it is because of fear of breaking the bathroom tile and all that that entails.

However, drilling or drilling a tile can be easier than you imagine if you take into account a number of aspects.

Although tiles are a smooth and brittle surface, The first thing that we must take into account for a successful result is the place where we are going to drill. To do this, it is necessary to tune the ear and with a few taps on the wall we will know where the hole is due to lack of paste and thus avoid that area, such as the joints between one and the other.

drill tiles

Once the area in which we are going to drill has been decided, we must select the correct drill. In this case, it will be a specific one for tiles. In these cases, the best to avoid cracking are the widia tip. that have a reinforced tip and preferably do not use drills with a diameter greater than 6 mm., to avoid excessive tension on the tiles and possible breakage.

In addition, it is important not to use the hammer when drilling, in order to prevent the tile from cracking, as well as to drill without exerting excessive pressure against the wall and at low revolutions.

Next, mark with a marker the point where you want to drill and with a awl Drill a small hole that breaks the glaze layer on the tile. In this way, the tip of the drill has a supportive pinto and facilitates our task.

But to make this task even easier and get drilling without breaking the tile, there is a little trick like putting a piece of masking tape or adhesive tape to prevent the bit from slipping on the tile.

Subsequently, the plug is inserted into the hole made in the wall and the furniture or accessory that we want can be screwed on.

How to avoid excessive mess?

The material with which the tiles are made causes a large amount of dust to come off when drilling. To avoid having to clean excessively and to make this task easier and cleaner, it is very useful to place an envelope or paper under the point to be drilled to collect much of the dust.